Skip to content

Product Support

My product has developed white deposits and has lost transparency. How can I correct this?

Limescale (or calcium carbonate) is a white, chalky build-up caused by hard water (water with a high mineral content) and it is common throughout the world. Reprocessing equipment using hard water can cause limescale to form on the equipment. If this is a constant problem, consider using rainwater for reprocessing equipment.

If you product has become coated in limescale, please do the following:

  1. Immerse in equal parts water and white vinegar (3-5%) for ten minutes.
  2. Rinse in clean water.
  3. Repeat if necessary.

 

How can I disinfect my product?

For more details, please refer to the directions for use for each product.

World Markets (where CE certification is accepted, US market excluded*)

Product Steam Autoclaving Boiling Steaming Glutaraldehyde Chlorine Bleach
Penguin Newborn Suction  √  √  √  √  
NeoNatalie Resuscitator  √  √  √  √  
Upright Newborn Bag-Mask**  √  √ ***  √ ***

 

*For any questions regarding the US, please contact your Laerdal representative

**Not available in the US

*** Validation ongoing¨¨

Some of my silicone products have become discolored. What can I do to prevent this?

The silicone rubber network can absorb organic matter from the environment (such as blood, tissue, and soap) at a molecular level. If the silicone rubber is exposed to certain chemicals, such as calcium hypochlorite or sodium hypochlorite (bleach), before organic matter is removed, then the organic matter may degrade within the rubber network and a yellow discoloration will occur. Prolonged exposure to chemicals can also degrade the silicone rubber and result in a stickiness.

To prevent this discoloration and to increase the lifetime of your device, we recommend the following:

  • Immediately rinse products in soap and water after use.
  • Remove all visible soil before reprocessing them with chemicals/autoclaving.
  • Do not soak in chemical disinfectants longer than recommended.
  • Do not boil/steam products with rusty metal instruments.
  • If your products become brown following boiling, consider changing your water source to rainwater.
  • Avoid exposure to petrochemical fumes.

Product Feedback

We would be very interested in hearing about your experience using our products. This will be helpful for our product development and improvement and to ensure we meet your needs in the best way. Please fill out the form below, and we will get back to you shortly.

This feedback is regarding

For example monthly demostration, daily skills retention, or weekly training session

Year and month